Log In
Register
Home
4:04 pm
Just a small sample of what we have:
Engine mounts
Transmission mount
Thermostats
Heater hoses (OEM & Z1 silicon)
PCV hoses (OEM & silicon)
Radiator fan and viscous coupling
OEM wheels
Rear subframe (TT) – actually every suspension component on the car
ABS sensors
ABS pump
Door cards
Doors (some complete, two & four seater)
Engine components – enough to build several engines
Driveshaft components – I still actually have one ally shaft for a 2+0 turbo as well as numerous OEM components
Z1 splined wheel nuts
OEM gasket sets
OEM timing belt kits
OEM hood clips etc
Bonnets
Seats
Nose panels
Bumpers (no 2+0 rear)
Z1 silicon radiator hoses (in black)
Z1 silicon rad hoses to suit lower rad hard pipe (in black)
Gear lever bushes
AMS short shifter kit
AMS engine mounts
Most electrical components including some working clocks
Inlet plenums
NA flywheels (currently three in my stash)
Stock ECUs – various
FPCUs
Air conditioning components including pumps and condensors, various hoses and pipes
Z1 cargo blind, brand new unused
2+0 spare tyre, I have a TT one + an NA one – one needs to go
NA diff (not ABS)
Many many more parts than this there so if you need something just ask, I normally get things out on the couriers pretty quickly HOWEVER I am just one man & sometimes things can slow the process down, if you make me aware of any serious urgency this will be taken in to account & I will prioritise accordingly 
5:13 pm
Hi there after a silver bonnet for the 300zx , on the 300zx website you said you had one cheers
5:59 pm
Yes I have one there for certain & as advised it would be $50 to purchase, I would need to pull it out of the pile to get a photo & confirm its condition however recently I threw away a lot of damaged/poorer condition items so it SHOULD be relatively good condition 
I'm located in the top end of Hamilton & can open shop on weekends if required for pick up or what ever.
Cheers
Glenn.
5:50 pm
No O2s in stock but can get Bosch at a very good price & can fit them in around an hour for you 
Otherwise I can import from Z1 or Coz etc next time we bring something in, freight will be very little on such small items.
As for the bonnet yes there is one there fore certain but has very poor condition paint on it, very straight but paint is trashed.
7:06 pm
Transmission mount would be OEM and would be around $120, the one I had in stock is sold but there is one on order that should be here next week
1:06 pm
Hi glenn, sometime early this year im looking to source in a 1 piece aluminum driveshaft for a 2+2 NA 300zx, i was just wondering how much through you would it cost to get one in, or if its cheaper approaching a driveshaft shop and having one made. cheers
7:46 pm
If you contact Peter at ATL in Hamilton he will be able to give you a quote to either build an ally shaft or a steel shaft.
Otherwise being fairly light they aren't all that expensive to bring in from Z1 although I'd have to get a quote on the shipping rather than just guess
9:33 pm
Hey…
How's it, do you still have the short shifter kit?
Also looking for a price for a set of 4.1 leader gears?
Thanks.
8:30 am
I'm pretty sure the short shifter is kicking around still
The leader gears are listed on Concept Zs website although I'm unsure if he actually has them in stock or just hasn't removed the listing, there is also a set for sale in Aus and the guy is asking $1K Aus plus post – getting really up there in price!!
Try emailing Coz & see if he can sort ya out, it might be the cheaper option if he actually has or can get them.
(as far as I know they are no longer being made)
6:04 pm
Hey, Don't suppose you have a passenger side t-top lever surround in black that doesn't have a crack also drivers door handle/window switch surround without a crack in black? Cheers
Also if you happen to find a manual turbo ecu thats got a good chip/set up i'd be keen. not overly important though
7:00 pm
Almost certain we will have
Need to have a look tomorrow to confirm.
3:50 pm
also wouldnt mind a series 2 ptu at some stage if you happen to have a good one laying around. what price would one of them be anyway? not in any rush for anything though still need to save up some coins.
Also a little bit of info / help on installing it would be good lol google is giving me mixed messages.
5:16 pm
Normally carry series two PTUs in stock as well as the harness to go with them, they go for around $260 all up depending on the exchange rate etc.
I don't have a good secondhand T top trim in stock, must have sol d the last of them at the garage sale some time ago.
I would provide fitting instructions for the PTU at the time of sale
7:58 pm
that's all good, what about the drivers side door handle / window switch surround?
Yeah i was looking at them on conceptz/z1 that had the loom with it but was curious to see if it would be the same to just get a 2nd hand one and rewire it in for cheaper. but i'll add that to my to do list at some stage. it's not needed just yet only though that i should get one at some time. so much on my to do list and so little money. Starting to save up now for the cambelt kit, will probably save to around 2-3grand then organise some time you have free and come for a drive up and get some things done.
1:42 pm
Hey would you have a good working tt viscous fan hub? I'm 90% sure mines broken which is why all i can hear is my fan when driving. I'm having a read around on forums atm and they said the jet sounding engine noise is a locked up fan hub and said it is meant to spin freely ( with little resistant ) when the engine is cold and off, but when i spin mine when then engine is cold and car not going it doesnt spin at all, i can move it with my hand but as soon as i take my hand off the fan stops instantly.
All RSSMost Users Ever Online: 62
Currently Online:
2 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Member Stats:
Guest Posters: 25
Members: 105
Moderators: 0
Admins: 1
Forum Stats:
Groups: 5
Forums: 9
Topics: 63
Posts: 453
Newest Members: Helensaics, HumanSor, Davididorb, RudolphLieva, Brianicops, JamesClusy, CarmelaVaf, XXXIKi, FuriousLato, Larrywom
Administrators: thelablimited (3)
